スタッド本数計算機

共有リンク

はじめに

Stud Count Calculator — Wall studs needed with corners & openings. Enter Wall length (ft), Stud spacing (in o.c.), Corners, Openings (doors/windows) to get an instant, accurate result.

計算式

Base studs = floor(wall length ÷ spacing) + 1, standard on-center framing math, plus extra studs for corners (2 each) and openings (3 each) such as doors and windows.

ステップごとの説明

Enter the Wall length (ft).
Enter the Stud spacing (in o.c.).
Enter the Corners.
Enter the Openings (doors/windows).
Click Calculate to see your result instantly.

実例

Example: With Wall length (ft) = 20, Stud spacing (in o.c.) = 16, Corners = 2, Openings (doors/windows) = 1, the Stud Count Calculator gives Base Studs: 16, Extra Studs: 7, Total Studs: 23.

よくある質問

Why 16 in or 24 in on-center spacing?

These are the most common stud spacings in residential framing — 16 in is typical for standard loads, while 24 in "advanced framing" spacing uses less lumber under lighter loads.

Why do openings add 3 studs each?

Door and window openings typically need a king stud, a jack (trimmer) stud on each side, and framing above — 3 extra studs per opening is a common rule-of-thumb allowance.

What inputs does the Stud Count Calculator need?

You'll need to provide: Wall length (ft), Stud spacing (in o.c.), Corners, Openings (doors/windows). All fields use sensible defaults, so you can see a working example immediately and then adjust the values to match your own numbers.

How accurate is the Stud Count Calculator?

The Stud Count Calculator applies the formula exactly as calculated — Base studs = floor(wall length ÷ spacing) + 1, standard on-center framing math, plus extra studs for corners (2 each) and openings (3 each) such as doors and windows. — so results are precise for the inputs you provide. Accuracy depends on entering correct, realistic input values.

Is the Stud Count Calculator free to use?

Yes, the Stud Count Calculator is completely free, requires no signup, and runs instantly in your browser.