CalculatorCast
Matemática Finanças Saúde e Fitness Data e Hora Conversores de Unidades Informática Física Química Construção Engenharia Estatística Educação Vida Cotidiana Biologia Automotivo Cozinha e Alimentação Esportes e Fitness Imóveis Fotografia Elétrica Agricultura Viagens Negócios
Todas as Calculadoras Favoritos ()
English Español Français Deutsch Português Italiano Nederlands Polski Türkçe 日本語 한국어 Svenska Norsk Dansk Suomi עברית

Calculadora de Quantidade de Montantes

Montantes de parede necessários com cantos e aberturas.

Introdução

Stud Count Calculator — Wall studs needed with corners & openings. Enter Wall length (ft), Stud spacing (in o.c.), Corners, Openings (doors/windows) to get an instant, accurate result.

Fórmula

Base studs = floor(wall length ÷ spacing) + 1, standard on-center framing math, plus extra studs for corners (2 each) and openings (3 each) such as doors and windows.

Passo a passo

  1. Enter the Wall length (ft).
  2. Enter the Stud spacing (in o.c.).
  3. Enter the Corners.
  4. Enter the Openings (doors/windows).
  5. Click Calculate to see your result instantly.

Exemplo do mundo real

Example: With Wall length (ft) = 20, Stud spacing (in o.c.) = 16, Corners = 2, Openings (doors/windows) = 1, the Stud Count Calculator gives Base Studs: 16, Extra Studs: 7, Total Studs: 23.

Perguntas Frequentes

Why 16 in or 24 in on-center spacing?
These are the most common stud spacings in residential framing — 16 in is typical for standard loads, while 24 in "advanced framing" spacing uses less lumber under lighter loads.
Why do openings add 3 studs each?
Door and window openings typically need a king stud, a jack (trimmer) stud on each side, and framing above — 3 extra studs per opening is a common rule-of-thumb allowance.
What inputs does the Stud Count Calculator need?
You'll need to provide: Wall length (ft), Stud spacing (in o.c.), Corners, Openings (doors/windows). All fields use sensible defaults, so you can see a working example immediately and then adjust the values to match your own numbers.
How accurate is the Stud Count Calculator?
The Stud Count Calculator applies the formula exactly as calculated — Base studs = floor(wall length ÷ spacing) + 1, standard on-center framing math, plus extra studs for corners (2 each) and openings (3 each) such as doors and windows. — so results are precise for the inputs you provide. Accuracy depends on entering correct, realistic input values.
Is the Stud Count Calculator free to use?
Yes, the Stud Count Calculator is completely free, requires no signup, and runs instantly in your browser.

Sobre a Calculadora de Quantidade de Montantes

The Stud Count Calculator uses a real, verifiable formula — Base studs = floor(wall length ÷ spacing) + 1, standard on-center framing math, plus extra studs for corners (2 each) and openings (3 each) such as doors and windows. — so results are accurate every time, not an approximation.